Bowers-wilkins CWM7 User Manual

EnglishCWM7

Copyright © B&W Group Ltd. E&OEIssue1B&W Group Ltd Dale Road Worthing West Sussex BN11 2BH EnglandT +44 (0) 1903 221 800 F +44 (0) 190

2www.bowers-wilkins.comWelcome to Bowers and Wilkins and the CWM7 SeriesThank you for choosing Bowers & Wilkins. When John Bowers rst established

3www.bowers-wilkins.com2. CWM7 Series Basics1. CWM7 Carton ContentsCWM7 Series in-wall speakers comprise a bafe carrying the speaker drivers and cros

43. Positioning CWM7 Series SpeakersAll CWM7 Series speakers require a clear depth of 102mm (4.02 in) from the front of the ceiling surface.Note: The

54. Installing CWM7 Series SpeakersTo install a CWM7 Series speaker proceed as described in the following paragraphs:4.1 Using the supplied cut-out te

64.4 Now connect the speaker cable to the spring terminals on the side back box, rst looping the cable around the strain relief bar. The diagram abov

74.7 The bafe can now be inserted into the back box. The bafe insertion and attachment technique is slightly different in the case of the CWM7.3 and

84.8 A port plug accessory is included with CWM7 Series speakers. The plug can be used if desired to reduce bass output by obstructing the speaker’s r

94.9 The grille can now be tted to the bafe. It is held in place magnetically so simply needs to be aligned with the groove in the back box ange wh